Description: Ride Engineering's Husqvarna performance link has a new application on the FE 250/350/450/501 '14-'16.
It will lower the rear on any of these models 33mm (1 1/4")! Set the fork between 12-15mm from flush and use around 100mm of sag.
If you're a vertically challenged desert rider, this set up handled good in the dry loose dirt, ate up the hard pack whoops
and still provided a cushy ride. Best of all while riding back home its much easier to reach the ground at traffic lights.
Husqvarna redesigned the FEs in 2017 and each model rides about 13mm lower (1/2") stock. This same link will lower these
models: FE 250/350/450/501 '17-'18; TE 150/250/300 '17-'18; 19-20mm (3/4") as the center knuckle has remained unchanged.
If you own a '17 or '18, set the sag between 100-105 and slide the forks up 10-12mm in the triple clamps.
Located in Costa Mesa California near the heart of the motorcycle industry, RIDE specializes in products that customize the motorcycle to optimize motorcycle performance while enhancing its appearance.